Download calibration by Senthil PDF

By Senthil

Show description

Read or Download calibration PDF

Best manufacturing books

Material Flow Systems in Manufacturing

This e-book includes a selection of contributions regarding the layout and keep an eye on of fabric move structures in production. fabric circulate platforms in production covers a vast spectrum of subject matters without delay affecting concerns regarding amenities layout, fabric dealing with and creation making plans and regulate.

Garment Manufacturing Technology

Garment production expertise offers an insiders examine this multifaceted strategy, systematically going from layout and construction to completing and qc. As technological advancements are remodeling all facets of garment production permitting brands to satisfy the becoming call for for higher productiveness and adaptability, the textual content discusses worthwhile info on product improvement, construction making plans, and fabric choice.

Technological Aspects of Manufacturing and Numerical Modelling of Clinch-Adhesive Joints

This brief publication describes the fundamental technological points excited about the construction of merely clinch and clinch-adhesive joints made from forms of adherent fabrics and applying assorted becoming a member of applied sciences. uncomplicated parameters that have to be taken under consideration within the layout procedure also are offered, whereas a comparability of experimental checking out of the hybrid joint with basic clinching for a mixture of alternative becoming a member of fabrics underlines the benefits of deciding upon hybrid joints.

The Chemistry of Thermal Food Processing Procedures

This short stories thermal methods within the meals – pasteurization, sterilization, UHT techniques, and others. It evaluates the consequences on a chemical point and attainable mess ups from a security point of view, and discusses in how a ways the results might be estimated. moreover, ancient maintenance options – smoking, addition of average ingredients, irradiation, and so on.

Additional resources for calibration

Sample text

Enhancement factor [f] is often handled as f = 1. 49 CALIBRATION IN PRACTICE CALIBRATION BOOK Example: Using reference dewpoint meter (Relative humidity) Hygrometer Place both the UUC and the reference hygrometer into the chamber of a humidity generator, or, supply moist air (gas) generated by a humidity generator to both the UUC and the hygrometer. This enables comparing the indicated value of the UUC to the value of the reference hygrometer. CALIBRATION IN PRACTICE 50 Example: Using reference hygrometer (Relative humidity) Consideration before calibration work: • • • • Shorten the connecting tube from the generator to the hygrometer as much as possible.

The dewpoint temperature is the saturation temperature corrected for possible pressure differences between the saturator and the measurement chamber. Dewpoint temperature is calculated using the formula 1. A two-temperature generator is the most accurate humidity generator and is used widely as the realization equipment for dewpoint temperature calibrations in national measurement standard laboratories. The effect of the enhancement factor is very small and the uncertainty in the dewpoint temperature due to the uncertainty of the enhancement factor is usually negligible.

In cases where only the reference is monitored and found to be stable the Unit Under Calibration (UUC) may still be not stabilized. In cases where the measurement system is not stable, sampling should be used to ensure a good representation of the quantity being measured, not just a single measurement at one point. 35 CALIBRATION ACTIVITIES CALIBRATION BOOK The number of samples should be large enough. Typically ten samples are adequate but if the system has a lot of variations, up to 100 samples at a reasonable interval should be taken to cover the full variation.

Download PDF sample

Rated 4.11 of 5 – based on 28 votes